Before and after pictures of a panel change out. These Breakers would not trip when overloaded
If you have an old panel with Breakers I will not trip or hard to actuate you might think about changing your panel to a new one
Before and after pictures of a panel change out. These Breakers would not trip when overloaded
If you have an old panel with Breakers I will not trip or hard to actuate you might think about changing your panel to a new one
Check your GFCI outlets often some of the old style outlets will not trip when they go bad.
This one was in a bathroom next to a sink and would not trip when tested.
That can be so dangerous.
This is years of no filter in a furnace your fan looks like this it's about time to clean it before it goes bad
Replaced a residential panel
Pulled the old one out and put a new and improved one in.
The whole house only had a 8 awg to feed the main panel, AC, drier, stove/oven, and separate shed.
A fire waiting to happen
Remodeling and need the panel moved
Here is a job that was done in Roy
Is your furnace rattling when you turn it on it could be your squirrel cage this is one that I replaced yesterday in really bad condition
Mon: | 8:00 AM – 6:00 PM |
---|---|
Tue: | 8:00 AM – 6:00 PM |
Wed: | 8:00 AM – 6:00 PM |
Thu: | 8:00 AM – 6:00 PM |
Fri: | 8:00 AM – 6:00 PM |
Sat: | 8:00 AM – 6:00 PM |
Sun: | Closed |